English
English
.jpg)
| Manual in-coming Code:CT-SC(A type) |
Electric out-coming line Code:CT-DC(A type) |
 |
 |
Plugging the operating handle into the hole of the closing operation shaft (lower right corner) clockwise rotation for 180℃, themechanism leads the contact to complete the closing operation of the load switch quickly. At the same time the spring with energystorage is ready for tripping.
Just stiring the tripping by opening button. the opening spring energy is released. and mechanism leads the principal shaft to complete the opening operation quickly.
The grounding operation of CTo-aC IXJ (A) spring operation mechanism is same to the CTo-aC (K).
Note: 1. The spring operation mechanism with outgoing line include the functions of the fuse tripping, manual tripping knob. Inaddition, it can include tripping coil and overcurrent tipping coil.
2. If users order elecric spring operation mechanism, please note the rate of voltage ( such as DC220, DC110, DC48, DC24)
3. If users need the shunt trip coil, please specify the rate of the voltage, or it is recognized the same voltage level as the electricoperating motor.
| CT operation handle 5WXJ.253.027 | lower interlocking 5WXJ.362.007 |
 |
 |
Solid insulated switchgear is a special type of switchgear that uses solid ...
Solid insulated switchgear mainly uses epoxy resin as the main insulating m...
The high voltage grounding switch is usually part of the disconnecting swit...
An air switch, also known as an air circuit breaker, is a type of circuit b...
GET A QUOTE
Русский язык
